Lashing chains
Grade 100 | 1- and 2-piece system
Products
Quality when
it matters
For load securing, we offer you a selection of grade 100 lashing chains. These offer a higher tensile force with the same nominal thickness compared to grade 80 and are available as a 1-part or 2-part system. Our lashing chains are manufactured exclusively according to EN12195-3, all components are made of tempered steel in grade 100. If you don't find the right product, ask us! We can modify the various lashing chains - and adapt them individually to your intended use.
Standard:
EN 12195-3
Standard length:
3.0 m
Shortening hook with safety device
Anti-rotation lock integrated in the ratchet load tensioner
Special quality chain with a permissible operating temperature of -40 to -200 ° C
Products
Product
properties
| Item number | Nominal thickness in mm | Lashing capacity LC in daN | Tensioning force in daN |
|---|---|---|---|
| ZKRR08x3000 | 8 | 5,000 | 1,250 |
| ZKRR10x3000 | 10 | 8,000 | 2,000 |
| ZKRR13x3000 | 13 | 13,400 | 2,000 |
| Item number | Nominal thickness in mm | Lashing capacity LC in daN | Tensioning force in daN | |
|---|---|---|---|---|
| ZK08x3000 set | 8 | 5,000 | 1,250 | |
| ZK10x3000 set | 10 | 8,000 | 2,000 | |
| ZK13x3000 set | 13 | 13,400 | 2,000 | |
| Ratchet load tensioner individually (with fork head connection, without shortening hook) | ||||
| RLSPX08 | 8 | 5,000 | 1,250 | |
| RLSPX10 | 10 | 8,000 | 2,000 | |
| RLSPX13 | 13 | 13,400 | 2,000 | |
Products
Our lashing
chain portfolio
We are here for you!
You can reach us by phone from
Mon – Fri 8 am – 5 pm at:
Alternatively, you can contact us at any time
reach via our contact form:
Lashing chains - proven aids for securing loads
Lashing chains are another aid for load securing. These are devices for securing loads, consisting of a tensioning chain with or without connecting elements and a tensioning element (ratchet tensioner or ratchet load tensioner). They are mostly used when large loads have to be secured, such as for heavy transport. Lashing chains can be used both for lashing down and for direct lashing. With both lashing methods, very high lashing capacities (LC) and pre-tensioning forces are achieved with lashing chains. Lashing chains are provided with a rectangular metal identification tag. When constructing the lashing chains, a distinction is made between systems with an integrated tensioning element (1-part system) and with a separate tensioning element (2-part system):
Lashing chains grade 100 | 1-piece system
Lashing chain and ratchet load tensioner are firmly connected. The length of these lashing systems can only be adjusted on one side of the ratchet load clamp. The advantage of the 1-part systems is that no parts can get lost.
Lashing chains grade 100 | 2-piece system
Lashing chain and ratchet load tensioner are separate. These lashing systems can be used flexibly, as the ratchet tensioner can be hung on the chain at the point where it fits best. This means that damage to the paintwork can be avoided with 2-part lashing chains.
Advantages
- 1-piece or 2-piece
- with ratchet load clamp
- different lengths configurable
- resistant to dirt, oil and external weather influences
- even under rough conditions, e.g. can be used for sharp-edged loads or rough surfaces
Contakt
If you cannot find the right product in our range right away, simply ask us using our contact form.